Research achievement (Sasaki)

主な研究業績 査読付き論文,Refereed Journal Publications (2006-)

  1. Yusuke Yanagisawa, Yasuhiro Kishi, and Katsuhiko Sasaki, “Residual Stress Analysis Considering Phase Transformation and Transformation Plasticity for Heat-Treated Large Size Shaft”, Key Engineering Materials 725:647-652, (2016).
  2. Atsuko Takita, Katsuhiko Sasaki, Ken-ichi Ohguchi, and Hiroyuki Fujiki, “Evaluation of the Stress Distribution by the Stepped Load Indentation Test with Constant Depth”, Key Engineering Materials 725:293-298, (2016).
  3. Ken-ichi Ohguchi, Katsuhiko Sasaki, “Estimation of Plastic and Creep Strain Development of SAC Solder under Cyclic Loading by Using Stepped Ramp Waves”, Key Engineering Materials 725:305-310, (2016).
  4. Yusuke Tomizawa, Takehito Suzuki, Katsuhiko Sasaki, Daisuke Echzenya, “Biaxial Ratchetting Deformation of Solders Considering Halt Conditions”, Key Engineering Materials 725:299-304, (2016).
  5. Toko Tokunaga, Koichi Takahashi, Munekazu Ohno, Katsuhiko Sasaki, Terumitsu Imanishi and Kiyotaka Matsuura, “Fabrication of Carbon Fiber Oriented Al-Based Composites by Hot Extrusion and Evaluation of Their Thermal Conductivity”, J. Japan Inst. Met. Mater. Vol. 80, No. 10, pp. 640-645, (2016).
  6. Md. Kamrul Hasan and Katsuhiko Sasaki, “Thermal deformation analysis of tabbed solar cells using solder alloy and conductive film”, Journal of Mechanical Science and Technology, Vol.30(7), pp. 3085-3095, (2016).
  7. 柳沢 祐介,小枝日出夫,佐々木克彦,「相変態及び変態塑性を考慮した大型軸材の熱処理残留応力解析」,日本機械学会論文集A編,DOI:10.1299/transjsme.15-00520,(2016).
  8. Yusuke Tomizawa, Katsuhiko Sasaki, Akiyoshi Kuroda, Ryo Takeda, and Yoshihiko Kaito, “Experimental and Numerical Study on Phase Change Material (PCM) for Thermal Management of Mobile Devices”, Applied Thermal Engineering, Vol. 98, pp. 320-329, (2016).
  9. A. Takita, K. Sasaki, K. Ohguchi, and R. Takeda, “An Effective Area Considering the Principal Stress to Evaluate Creep Strain Measured by Indentation Test”, Experimental Mechanics,Vol.55, pp. 1081-1091, DOI 10.1007/s11340-015-0005-5, (2015).
  10. Achmad Syaifudin, Ryo Takeda and Katsuhiko Sasaki, “Effects of plaque lengths on stent surface roughness”, Bio-Medical Materials and Engineering, Vol. 25, pp. 189-202, (2015).
  11. Atsuko Takita, Katsuhiko Sasaki, and Ken-ichi Ohguchi, “A Method to Identify Steady Creep Strain from Indentation Creep Using a New Reference Area of Indentation”, Journal of Electronic Materials, Vol. 43, No. 7, pp. 2530-2439, (2014).
  12. Kohei Fukuchi, Katsuhiko Sasaki, Terumitsu Imanishi, Kazuaki Katagiri, and Atsushi Kakitsuji, “Correlations between Thermal Conductivity and Inelastic Deformation of Aluminum Based Composites Containing VGCF-CNT Network”, Journal of Solid Mechanics and Materials Engineering, Vol. 6, No. 7, pp. 801-813, (2012).
  13. 福地孝平,佐々木克彦,今西輝光,片桐一彰,清水昭之,垣辻篤,「VGCF-Al高熱伝導複合材料の高温強度特性」,日本機械学会論文集A編,日本機械学会,Vol.77,No.779,pp.1037-1040(2011).
  14. K. Sasaki, and K. Ohguchi, “Uniaxial Ratchetting Behavior of Solder Alloys and Its Simulation by an Elasto-Plastic-Creep Constitutive Model”, Journal of Electronic Materials, Vol. 40. N0. 12, pp. 2403-2414, (2011).
  15. Daisuke Echizenya, Hiroo Sakamoto, and Katsuhiko Sasaki, “Effect of Mechanical Surface Damage on Silicon Wafer Strength”, Procedia Engineering, Vol. 10, pp. 1440-1445, (2011).
  16. Kohei Fukuchi, Katsuhiko Sasaki, Kazuaki Katagiri, Terumitsu Imanishi, and Atsushi Kakitsujji, “Alminium Based High Thermal Conductive Composites Containing CNT and VGCF -Deformation Dependence of Thermal Conductivity-”, Procedia Engineering, Vol. 10, pp. 912-917, (2011).
  17. Katsuhiko Sasaki, Kohei Fukuchi, Kazuaki Katagiri, Terumitsu Imanishi, Akiyuki Shimizu, and Atushi Kakitsuji, “High Thermal Conductive Composite Containing a Network of Vapor Grown Carbon Fiber and Carbon Nanotube in Aluminum Matrix”, Proceedings of 49th AIAA Aerospace Sciences Meeting, AIAA 2011-254-1-9, (2011).
  18. K. Ohguchi and K. Sasaki, “Constitutive Modeling for SAC Lead-Free Solder based on Cyclic Loading Tests using Stepped Ramp Waves”, Procedia Engineering, Vol. 10, pp. 1139-1144, (2011).
  19. Ken-ichi Ohguchi, and Katsuhiko Sasaki, “Investigation of Effect of Creep Strain Component on Low Cycle Fatigue of Lead-Free Solder by Cyclic Stepped Ramp Wave Loading”, Transactions of ASME, Journal of Electronic Packaging, Vol. 132, 0410003-1-040003-7, (2010).
  20. Ken-ichi Ohguchi, and Katsuhiko Sasaki, “Time-Independent and Time-Dependent Inelastic Strains Analysis of Lead-Free Solder by Cyclic Stepped Ramp Wave Loading Test”, Transactions of ASME, Journal of Electronic Packaging, Vol. 132, 041010-1-041010-7, (2010).
  21. Tsuyoshi Takahashi, and Katsuhiko Sasaki, “Low cycle thermal fatigue of aluminum alloy cylinder head in consideration of changing metrology microstructure”, Procedia Engineering, Vol. 2, pp. 767-776, (2010).
  22. Kohei Fukuchi, Katsuhiko Sasaki, Terumitsu Imanishi, Kazuaki Katagiri, and Atsushi Kakitsuji, “Strength of VGCF/Al Composites for High Thermal Conductivity”, Journal of Solid Mechanics and Materials, Vol. 4, No. 8, pp. 1273-1281, (2010).
  23. 本田真也,成田吉弘,佐々木克彦,「繊維形状最適化による複合材積層板の固有振動数最大化」,日本機械学会論文集C編,75(753),pp.1244-1250(2009).
  24. Ken-ichi Ohguchi, and Katsuhiko Sasaki, “Evaluation of Time-Independent and Time-Dependent Strains of Lead-Free Solder by Stepped Ramp Loading Test”, Transactions of ASME, Journal of Electronic Packaging, Vol. 131, pp. 021003-1-021003-7, (2009).
  25. Sinya Honda, Yoshihiro Narita, and Katsuhiko Sasaki, “Discrete Optimization for Vibration Design of Composite Plates by Using Lamination Parameters”, Advanced Composite Materials, Vol. 18, pp. 297-314(2009).
  26. 今西輝光, 佐々木克彦, 片桐一彰,垣辻篤,「CNTを添加したVGCF/アルミニウム複合材料の熱伝導特性」,日本機械学会論文集A編,75(749),pp.27-33(2009).
  27. Takuji Kobayashi and Katsuhiko Sasaki, “Experiments and simulations of uniaxial ratchetting deformation of Sn-3Ag-0.5Cu and Sn-37Pb solder alloys”, Journal of Materials Science: Material in Electronics, Vol. 20, pp. 343-353, (2009).
  28. Sinya Honda, Yoshimasa Oonishi, Yoshihiro Narita, and Katsuhiko Sasaki, “Vibration Analysis of Composite Rectangular Plates Reinforced along Curved Lines”, Journal of System Design and Dynamics, Vol. 2, pp. 76-82, (2008).
  29. Tsuyoshi Mayama, Katsuhiko Sasaki, and Mitsutoshi Kuroda, “Quantitative evaluations for strain amplitude dependent organization of dislocation structures due to cyclic plasticity in austenitic stainless steel 316L”, Acta Materialia, Vol. 56, pp. 2735-2743, (2008).
  30. 今西輝光,佐々木克彦,片桐一彰,垣辻篤,「VGCF含有アルミニウム複合材料の熱伝導および強度特性」,日本機械学会論文集A編,74(741),pp.655-661(2008).
  31. 高橋 剛,佐々木克彦,飯田真,豊田武司,「シリンダーヘッド用アルミ合金の微視的組織変化と材料挙動」,自動車技術会論文集, 30(1),pp.113-120(2008).
  32. Feng Ju, Zihui Xia, and Katsuhiko Sasaki, “On The Finite Element Modelling of Balloon-Expandable Stents”, Journal of the Mechanical Behavior of Biomedical Materials, Vol. 1, pp. 86-95, (2008).
  33. Zihui Xia, Feng Jua and Katsuhiko Sasaki, “A General Finite Element Analysis Method for Balloon Expandable Stents based on Repeated Unit Cell (RUC) Model”, Journal of Finite Elements in Analysis and Design, Vol. 43, pp. 649-658, (2007).
  34. Tsuyoshi Mayama, Katsuhiko Sasaki, and Yoshihiro Narita, “Surface Morphological Changes in CP-Ti and SUS316L under Pure Tensile Loading and Creep”, Key Engineering Materials, Vols.353-358, pp. 607-610, (2007).
  35. Katsuhiko Sasaki, Terumitsu Imanishi, Kazuaki Katagir, Atushi Kakitsuji, Toyohiro Satoh, Akiyuki Shimizu, and Nobuhito Nakama, “Strength and Thermal Conductivity of Carbon Nanotube Containing Aluminum”, Key Engineering Materials, Vols.353-358, pp. 587-590, (2007).
  36. Tsuyoshi Mayama, Katsuhiko Sasaki, and Yoshihiro Narita, “Inter- and Intra- Grain Deformation of CP-Ti and SUS316L under Pure Tensile Loading and Creep”, Key Engineering Materials, in press.
  37. Kenichi Murayama, Yoshihiro Narita, and Katsuhiko Sasaki, “The Shear Deformable Effect on Optimum Lay-Ups of Laminated Plates”, Key Engineering Materials, Vols.334-335, pp. 97-100, (2007).
  38. Takuma Kawakami, Yoshihiro Narita, and Katsuhiko Sasaki, “Optimization of Sound Pressure from Vibrating Laminated Rectangular Plates”, Key Engineering Materials, Vols.334-335, pp. 93-96, (2007).
  39. T. Kobayashi, K. Sasaki, K. Ohguchi, and Y. Narita, “Experimental and Theoretical Investigation of Viscoplastic Deformation of Solder Alloys for Electronic Packaging”, Key Engineering Materials, Vols.345-346, pp. 97-100, (2007).
  40. Tsuyoshi Mayama, Katsuhiko Sasaki, and Yoshihiro Narita, “Quantitative Evaluation of Dislocation Structure Induced by Cyclic Plasticity”, Key Engineering Materials, Vols.345-346, pp. 49-52, (2007).
  41. T. Mayama, K. Sasaki, and H. Ishikawa, “Relationship between Phenomenological Constitutive Model and Dislocation Structure in Cyclic Plasticity of Austenitic Stainless Steel”, Key Engineering Materials, Key Engineering Materials, Vols.340-341, pp. 871-876, (2007).
  42. T. Kobayashi, K. Sasaki, K. Ohguchi, and Y. Narita, “Ratchetting and Creep Deformation of Solder Alloys”, Key Engineering Materials, Vols.340-341, pp. 859-864, (2007).
  43. Shinya Honda, Yoshihiro Narita, and Katsuhiko Sasaki, “Optimization for Maximum Buckling Loads of Laminated Composite Plates – Comparison of Various Design Methods”, Key Engineering Materials, Vols. 334-335, 89-92, (2007)
  44. T. Mayama, K. Sasaki, and H. Ishikawa, “A Constitutive Model of Cyclic Viscoplasticity Considering Changes in Subsequent Viscoplastic Deformation due to the Evolution of Dislocation Structures”, International Journal of Plasticity, Vol. 23, pp. 915-930, (2007).
  45. Katsuhiko Sasaki, Takuji Kobayashi, and Ken-ichi Ohguchi, “Experimental Observation of Correlation between Creep and Uniaxial Ratchetting of Sn/37Pb and Sn/3Ag/0.5Cu Solder Alloys”, Transactions of ASME, Journal of Electronic Packaging, Vol.129, pp. 82-89, (2007).
  46. K. Ohguchi, K. Sasaki, and M. Ishibashi, “A Quantitative Evaluation of Time-Independent and Time-Dependent Deformations of Lead-Free and Lead-Containing Solder Alloys”, Journal of Electronic Materials, Vol. 35, 132-139, (2006).
  47. K. Sasaki, and T. Takahashi, “Low Cycle Thermal Fatigue and Microstructural Change of AC2B-T6 Aluminum Alloy”, International Journal of Fatigue, Vol. 28, 203-210, (2006)
  48. T. Mayama, and K. Sasaki, “Investigation of Subsequent Viscoplastic Deformation of Austenitic Stainless Steel Subjected to Cyclic Preloading”, International Journal of Plasticity, Vol. 22, pp. 374-390 (2006).

コメントは停止中です。