Research achievement (成田, Publication by Narita)

主な研究業績

学術論文 (査読付) (Refereed Journal Publications)

 (updated at times),(IF=xxx /5): Impact Factor over five years

119. 本田 真也,髙橋 圭佑,成田 吉弘, 双安定性を有する複合材シェルのスナップスルー変形に関する多目的最適化, 日本機械学会論文集,in press.

118. Jinqiang LI, Yoshihiro NARITA, “The effect of aspect raios and edge conditions on the optimal damping design of thin soft core sandwich plates and beams,” Journal of Vibration and Control, accepted (2012). DOI: 10.1177/1077546312463756.

117. Jinqiang LI, Yoshihiro NARITA, “Analysis and optimal design for the damping property of laminated viscoelastic plates under general edge conditions,” Composites Part B: Engineering, accepted (2012), DOI: 10.1016/j.compositesb.2012.09.014.

116. Jinqiang LI, Yoshihiro NARITA, “Vibration suppression for laminated cylindrical panels with arbitrary edge conditions,” Journal of Vibration and Control, accepted (2012). DOI: 10.1177/1077546312442698.

115. Shinya HONDA, Teruki IGARASHI and Yoshihiro NARITA, “Multi-Objective Optimization of Curvilinear Fiber Shapes for Laminated Composite Plates by Using NSGA-II”, Composites Part B: Engineering, (2013), Vol.45, pp.1071-1078.

114. 李 美龍, 田中恒也, 成田吉弘(Y.Narita),  画像を用いた製品の「飽き」に関する感性評価-デザインの視覚的要素を中心に-, (Kansei evaluation on the tiresomeness of products using visual images -Focus on the visual element of the product design), 日本感性工学会論文誌 (Transactions of Japan Society of Kansei Engineering), 第11巻, 3号, pp. 407 – 417. https://www.jstage.jst.go.jp/browse/jjske/-char/ja/

113. 和田将明,本田 真也,成田 吉弘(Y. Narita), 遠心力を受ける複合材積層板の振動解析(in Japanese), (Vibration Analysis of Laminated Composite Plates under Centrifugal Forces), 日本機械学会論文集(C編)(Transaction of JSME), Vol. 78, No. 789 (2012), pp.1586-1595.

112. Mochida, S. Ilanko, M. Duke and Y. Narita, Free Vibration Analysis of Doubly Curved Shallow Shells Using the Superposition-Galerkin Method, Journal of Sound and Vibration, Vol.331, (2012), pp.1413-1425. (IF=1.572 /5)

111. Shinya Honda, Takeru Kato, Yoshihiro Narita and Daisuke Narita, Multidisciplinary Design Optimization of Surface Shapes and Lay-up Configurations for Laminated Composite Shells, Journal of System Design and Dynamics, JSME, Vol.5, (2011), pp.1662-1673.

110. Shinya Honda and Yoshihiro Narita, Natural Frequencies and Vibration Modes of Laminated Composite Plates Reinforced with Arbitrary Curvilinear Fiber Shape Paths, Journal of Sound and Vibration, Vol.331, (2012-1), pp.180-191. (IF=1.572 /5)

109. Shinya Honda, Itsuro Kajiwara, and Yoshihiro Narita, Multidisciplinary Design Optimization for Vibration Control of Smart Laminated Composite Structures, Journal of Intelligent Material Systems and Structures, Vol.22, (2011), pp.1419-1430. (IF=1.811 /5)

108. 本田 真也,加藤 大翔,成田 吉弘(Y. Narita), 成田 大祐, 繊維強化複合材シェルの曲面形状と積層構成の統合最適化(in Japanese), (Multidisciplinary Design Optimization of Surface Shapes and Lay-Up Configurations for Composite Laminated Shells), 日本機械学会論文集(C編)(Transaction of JSME), Vol. 77, No. 777 (2011), pp. 1793-1802.

107. Shinya Honda and Yoshihiro Narita, Vibration Design of Laminated Fibrous Composite Plates with Local Anisotropy Induced by Short Fibers and Curvilinear Fibers, Composite Structures,Vol. 93 (2011), pp. 902-910. (IF=2.033 /5)

106. 矢澤 宗厚,成田 吉弘(Y. Narita), ペットボトル形状に対する印象評価,(in Japanese) (Evaluation of Impression to Pet-bottle Shape), 日本感性工学会論文誌(Kansei Engineering, journal of the Japan Society of Kansei Engineering, Vol.10,No.1,(2010), pp.27-34.

105. 本田 真也,大西 良昌,成田 吉弘(Y. Narita), 曲線状繊維によって強化された複合材積層板の座屈解析,(in Japanese) (Minimization of Stress Concentration for Laminated Composite Plates with Curvilinearly Shaped Fibers), 日本機械学会論文集(C編) (Transaction of JSME), Vol. 76, No. 765 (2010), pp. 1056-1061.

104. 上甲 康之,本田 真也,成田 吉弘(Y. Narita),実験計画法を用いた複合材料構造の多目的最適化, (in Japanese), (Multi-Objective Optimum Design of Composite Structures by Using the Design of Experiments), 日本機械学会集(C編) (Transaction of JSME), Vol. 76, No. 765 (2010), pp. 1062-1067.

103. 成田 吉弘(Y. Narita),山口 雄平,申 義變,多孔性長方形板のモデリングと振動特性,(in Japanese) (Modeling and Vibration Behavior of Porous Rectangular Plates), 日本機械学会論文集(C編) (Transaction of JSME), Vol. 76, No. 766 (2010), pp. 1413-1418.

102. 本田 真也,大渡 康介,成田 吉弘(Y. Narita), 曲線状繊維によって強化された複合材積層板の応力集中最小化, (in Japanese), (Minimization of Stress Concentration for Laminated Composite Plates with Curvilinearly Shaped Fibers), 日本機械学会論文集(A編) (Transaction of JSME), Vol. 76, No. 769 (2010), pp. 1139-1146.

101. Shinya Honda, Yoshihiro Narita and Katsuhiko Sasaki, Maximizing the Fundamental Frequency of Laminated Composite Plates with Optimally Shaped Curvilinear Fibers,Journal of System Design and Dynamics, JSME, Vol.3, No.6, (2009), pp.867-876.

100. Shinya Honda, Yoshihiro Narita and Katsuhiko Sasaki, Discrete Optimization for Vibration Design of Composite Plates by Using Lamination Parameters,Advanced Composite Materials,Vol.18,  (2009), pp.297-314. (IF=0.408 /5)

99. 本田 真也,成田 吉弘(Y. Narita),佐々木 克彦, 繊維形状最適化による複合材積層板の固有振動数最大化,(in Japanese), (Maximizing the Fundamental Frequency of Laminated Composite Plates with Optimally Shaped Curvilinear Fibers), 日本機械学会論文集(C編) (Transaction of JSME), Vol.75, No.753 (2009), pp.1244-1250.

98. Shinya Honda, Yoshihiro Narita, Design for the Maximum Natural Frequency of Laminated Composite Plates by Optimally Distributed Short Fibers, Journal of System Design and Dynamics, Vol.2, No.6(2008), pp.1195-1205.

97. 本田 真也,Jacob Andkjaer, 成田 吉弘(Y. Narita), 汎用FEMの援用による複合材料構造の層別最適化, (in Japanese) , (Layerwise Optimization of Laminated Comoposite Structures by Using a General-Purpose FEM Software), 日本機械学会論文集(C編) (Transaction of JSME), Vol.74, No.743 (2008), pp.1926-1927.

96. 本田 真也, Stefan Berger, 成田 吉弘(Y. Narita), 固有振動数データを用いた偏平シェルの境界条件同定, (in Japanese) , (Identification of Boundary Conditions in Shallow Shells by Using Frequency Data), 日本機械学会論文集(C編), (Transaction of JSME), Vol.74, No.742 (2008), pp. 1676-1677.

95. 本田 真也,成田 吉弘(Y. Narita), 最適な短繊維分布による複合材積層板の固有振動数最大化, (in Japanese) , (Design for the Maximum Natural Frequency of Laminated Composite Plates by Optimally Distributed Short Fibers), 日本機械学会論文集(C編) (Transaction of JSME), Vol.74, No.741 (2008), pp.1049-1055.

94. Shinya Honda, Yoshimasa Oonishi, Yoshihiro Narita, Katsuhiko Sasaki, Vibration Analysis of Composite Rectangular Plates Reinforced along Curved Lines, Journal of System Design and Dynamics, Vol.2, No.1 (2008), pp.76-86.

93. Daisuke Narita, Yoshihiro Narita, Vibration Analysis of shallow Shells with General Surfaces Expressed by Cubic Polynomial Function, Journal of System Design and Dynamics, Vol.2(2008), No.1, pp.105-116.

92. Daisuke Narita, Yoshihiro Narita, Analysis and Design of Curved Laminated Composite Panels under External Pressure, Key Engineering Materials, Vol. 353-358, (2007), pp.1271-1274.

91. Tsuyoshi Mayama, Katsuhiko Sasaki, Yoshihiro Narita, Surface Morphological Changes in CP-Ti and SUS316L under Pure Tensile Loading and Creep, Key Engineering Materials, Vol. 353-358, (2007), pp.607-610.

90. Tsuyoshi Mayama, Katsuyoshi Sasaki, Yoshihiro Narita, Quantitative Evaluation of Dislocation Structure Induced by Cyclic Plasticity, Key Engineering Materials, Vol. 345-346, (2007), pp.49-52.

89. Kobayshi T., Sasaki K., Ohguchi K., Y. Narita, Experimental and Theoretical Investigation of Viscoplastic Deformation of solder alloys for Electronic Packaging, Key Engineering Materials, Vol. 345-346, (2007), pp.97-100.

88. T. Mayama, K. Sasaki, Y. Narita, Relation between phenomenological constitutive model and dislocation structure in cyclic plasticity of austenitic stainless steel, Key Engineering Materials, Vols. 340-341, (2007), pp. 871-876.

87. T. Kobayashi, K. Sasaki, K. Ohguchi and Y. Narita, Ratchetting and Creep Deformation of Solder Alloys, Key engineering Materials, Vol.340-341, (2007), pp.859-864.

86. D. Narita and Y. Narita, Analysis for vibration of laminated shallow shells with non-uniform curvature, Key Engineering Materials, Vol.334-335, (2007), pp.85-88.

85. S. Honda, Y. Narita and K. Sasaki, Optimization for the maximum buckling loads of laminated composite plates –Comparison of various design methods, Key Engineering Materials, Vol.334-335, (2007), pp.89-92.

84. T. Kawakami, Y. Narita and K. Sasaki, Optimization of sound pressure from vibrating laminated rectangular plates, Key Engineering Materials, Vol. 334-335, (2007), pp.93-96.

83. K. Murayama, Y. Narita and K. Sasaki, The shear deformable effect on optimum lay-ups of laminated rectangular plates, Key Engineering Materials, Vol. 334-335, (2007), pp.97-100.

82. 成田大祐,成田吉弘(Y. Narita), 不均一な曲率を持つ積層偏平シェルの振動解析法,(in Japanese), (Vibration Analysis of Laminated Shallow Shells with Non-uniform Curvature), 日本機械学会誌(Transaction of JSME),Vol.72, No.724C, (2006.12), pp.3743-3750.

81. Y. Narita and P. Robinson, Maximizing the fundamental frequency of laminated cylindrical panels using layerwise optimization, International Journal of Mechanical Sciences (IF=0.761), Vol.48, (2006), pp.1516-1524. (IF=1.542 /5)

80. 本田真也,成田吉弘(Y. Narita),積層パラメータの離散誤差最小化による複合材積層板の座屈特性最適化,(in Japanese), (Buckling Optimization of Laminated Composite Plates by Minimizing Errors of the Discrete Lamination Parameters), 日本機械学会誌(Transaction of JSME), Vol.72, No.720, A,(2006.8), pp.1262-1269.

79. Y. Narita, Maximum frequency design of laminated plates with mixed boundary conditions, International Journal of Solids and Structures, Vol.43, (2006), pp.4342-4356. (IF=2.067 /5)

78. 成田吉弘(Y. Narita), FEMと結合した積層板の層別最適化(LO)法の提案,(in Japanese), (A Layerwise Optimization Approach Combined with FEM for Optimizing Laminated Composite Plates), 日本複合材料学会誌(Journal of Japan Society for Composite Materials), Vol.31, No.1,(2005.1), pp.38-44.

77. Y. Narita and J.M. Hodgkinson, Layerwise optimization for maximising the fundamental frequencies of point-supported rectangular laminated composite plates, Composite Structures, Vol.69, (2005), pp.127-135. (IF=2.033 /5)

76. Y. Narita and G.J. Turvey, Maximising the buckling loads of symmetrically laminated composite rectangular plates using a layerwise optimization (LO) approach, Journal of Mechanical Engineering Science, I.Mech.E., Vol.218(Part.C), (2004) pp.681-691. (IF=0.527 /5)

75. Y. Narita, Layerwise optimization for the maximum fundamental frequency of laminated composite plates, Journal of Sound and Vibration, Vol.263, (2003), pp.1005-1016. (IF=1.572 /5)

74. 福士賢一,成田吉弘(Y. Narita), 融雪機の機能と故障解析に関する研究,(in Japanese), (Study on Function and Failure Analysis of Snow Melting Machines), 日本機械学会論文集(Transaction of JSME), Vol.68, No.675(C),(2002.11), pp.3447-3455.

73. M. Sasajima, T. Kakudate, Y. Narita, Prediction and design of metal plate vibration behavior with bonded composite sheets, American Institute of Aeronautics and Astronautics Journal, Vol.40, No.8, (2002-8), pp.1679-1682. (IF=1.249 /5)

72. Y. Narita, Multi-objective design for vibration and buckling of laminated plates by statistical treatment, Composite Structures (IF=0.556), Vol.57, (2002), pp.315-322. (IF=2.033 /5)

71. Y. Ohta, Y. Narita and K.Nagasaki, On the damping analysis of FRP laminated composite plates, Composite Structures, Vol.57, No.1-4, (2002), pp.169-175 (IF=2.033 /5)

70. M. Sasajima, T. Kakudate, Y. Narita, Vibration behavior and simplified design of thick rectangular plates with variable thickness, Trans. ASME, Journal of Vibration and Acoustics, Vol.124, (2002-4), pp.302-309. (IF=0.701 /5)

68. Y. Narita, K. Fukushi, X. Zhao, Vibration analysis of shear-deformable circular and elliptical laminated plates, JSME International Journal, Vol.45, No.1, (2002-3), pp.113-120.

69. 笹島学,木内学,成田吉弘(Y. Narita), 形鋼の軽圧下圧延時の反りに対する被圧延材進入パラメータの影響,(in Japanese), (Journal of the Japan Society for Technology of Plasticity), 塑性と加工,Vol.42,No.486,(2001-7), pp.690-694.

67. Y. Narita, Combinations for the free-vibration behaviors of anisotropic rectangular plates under general edge conditions, Trans. ASME Journal Applied Mechanics, Vol.67, (2000), pp.568-573. (IF=1.001 /5)

66. 成田吉弘(Y. Narita), 新田敏則, 積層偏平シェルの基本振動数最大化と解の近似による影響について, (in Japanese), (Maximization of Fundamental Frequency and Effects of Approximation in the Solutions for Laminated Shallow Shells), 日本機械学会論文集(Transaction of JSME), Vol.65, No.634(C),(1999.6), pp.2161-2167.

65. Y. Narita and T. Nitta, Optimal design by using various solutions for vibration of laminated shallow shells on shear diaphragms, Journal of Sound and Vibration, Vol.214, No.2 (1998.4), pp.227-244. (IF=1.572 /5)

64. Y. Narita and X. Zhao, An optimal design for the maximum fundamental frequency of laminated shallow shells, International Journal of Solids and Structures, Vol.35, No.20, (1998.2) pp.2571-2583. (IF=2.067 /5)

63. 趙希禄, 成田吉弘(Y. Narita), 支持点と繊維配向角を組合せた積層長方形板の振動特性の最適設計, (in Japanese), (An Optimal Design for Vibration Characteristics of Laminated Rectangular Plates by Combining Elastic Support Points and Fiber Orientations), 日本機械学会論文集(Transaction of JSME), vol.63, No.613 (C),(1997.9), pp.3023-3029.

62. 趙希禄, 成田吉弘(Y. Narita), Complex法による一般的な積層長方形板の基本振動数の最大化設計,(in Japanese), (Maximization of Fundamental Frequency for Generally Laminated Rectangular Plates by the Complex Method), 日本機械学会論文集(Transaction of JSME), Vol.63, No.606(C),(1997-2) ,pp.364-370.

61. 成田吉弘(Y. Narita), 福士賢一, 古典板理論に基づく一般積層長方形板の力学解析プログラム, (in Japanese), (Analysis Program for Generally Laminated Rectangular Plates Based on the Classical Plate Theory), 日本機械学会論文集(Transaction of JSME), Vol.62, No.603(A),(1996-11) ,pp.2621-2627.

60. Y. Narita, A method for solving the three dimensional vibration of a unidirectional composite parallelepiped, Materials Science Research International(Journal of the society of material Science, Japan), Vol.2, No.2, (1996-6), pp.105-110.

59. Y. Narita, M. Itoh, and X. Zhao, Optimal design by genetic algorithm for maximum fundamental frequency of laminated shallow shell, Advanced Composite Letters, Vol.5, No.1 (1996), pp.21-24. (IF=0.277 /5)

58. 成田吉弘(Y. Narita), 趙希禄, 積層偏平シェルの振動特性の最適化,(in Japanese), (Optimization for Vibration Characteristics of Laminated Shallow Shells), 日本機械学会論文集(Transaction of JSME), Vol.62, No.595(C),(1996-3), pp.817-822.

57. 太田佳樹,成田吉弘(Y. Narita), 多層理論を用いたクロスプライ積層平板の振動解析, (in Japanese), (Vibration Analysis of Cross-Ply Laminated Plates Using the Multilayer Theory), 日本機械学会論文集(Transaction of JSME), Vol.62, No.545(C),(1996-2),pp.444-450.

56. 成田吉弘(Y. Narita), 連続体の振動解析に関する研究展望(はり,平板,殻の振動問題), (in Japanese), (Overview on Vibration Analysis of Continuous Systems : Vibration Problems of Beams, Plates and Shells), 日本機械学会論文集(Transaction of JSME), Vol.61, No.583(C), (1995-3), pp.738-745.

55. 成田吉弘(Y. Narita),太田佳樹,森賀茂樹,対称積層されたクロスプライ厚肉長方形板の三次元振動解析, (in Japanese), (Three-Dimensional Vibration Analysis of Symmetrically Laminated, Cross-Ply Thick Rectangular Plates), 日本機械学会論文集(Transaction of JSME), Vol.61, No.583C , (1995-3), pp.842-848.

54. 成田吉弘(Y. Narita), 太田佳樹, 森賀茂樹, 目黒雄二, 任意の境界条件を考慮した厚肉積層長方形板の振動解析法, (in Japanese), (Vibration Analysis of Thick, Laminated Rectangular Plates Having Arbitrary Boundary Conditions), 日本機械学会論文集(Transaction of JSME), Vol.60, No.570(C), (1994-2), pp.406-411.

53. 太田佳樹, 成田吉弘(Y. Narita), 軸圧縮を受けるアングルプライ円筒殻の座屈解析, (in Japanese), (Elastic Buckling Analysis of Angle-Ply Laminated Circular Cylindrical Shells Subjected to Axial Compressive Load), 日本機械学会論文集(Transaction of JSME), Vol.60, No.569(A), (1994-1), pp.229-235.

52. 成田吉弘(Y. Narita), 複合材料構造物のモデリングと振動問題における研究展望, (in Japanese), (Modeling of Composite Structures and Overview on the Related Vibration Problems), 日本機械学会論文集(Transaction of JSME), Vol.59, No.565(C), (1993-9), pp.2593-2599.

51. Y. Narita, Y. Ohta and M. Saito, Finite element study for natural frequencies of cross-ply laminated cylindrical shells, Composite Structures, 26-1 & 2,(1993-1), pp.55-62. (IF=2.033 /5)

50. 成田吉弘(Y. Narita), Polya理論による構造物の形状と境界条件の組合せ数の算出, (in Japanese), (Calculation of Combinations for Structural Shapes and Boundary Conditions by Polya Counting Theory), 日本機械学会論文集(Transaction of JSME), Vol.58, No.555(C), (1992-11), pp.3429-3433.

49. 成田吉弘(Y. Narita), 境界条件の自由な組合せを考慮したFRP積層板の振動解析法, (in Japanese), (An Analytical Method for Vibration of Laminated Composite Rectangular Plates Having Arbitrary Combinations of Boundary Conditions), 日本複合材料学会誌(Journal of Japan Society for Composite Materials), 第18巻3号, (1992-5), pp.113-120.

48. Y. Narita, Y. Ohta, G. Yamada and Y. Kobayashi, Analytical method for vibration of angle-ply cylindrical shells having arbitrary edges, American Institute of Aeronautics and Astronautics Journal,Vol.30,No.3,(1992-3), pp.790-796. (IF=1.249 /5)

47. Y. Narita and A.W. Leissa, Frequencies and mode shapes of cantilevered laminated composite plates, Journal of Sound and Vibration (IF=0.821), Vol.154,No.1, (1992), pp.161-172.

46. 太田佳樹, 成田吉弘(Y. Narita), 山田元, 小林幸徳, アングルプライ積層厚肉円筒殻の自由振動, (in Japanese), (Free Vibration of an Angle-Ply Laminated, Thick Circular Cylindrical Shell), 日本機械学会論文集(Transaction of JSME), Vol.57, No.538(C), (1991-6), pp.1815-1823.

45. 高橋一郎, 成田吉弘(Y. Narita), 面内力を受ける異方性変厚連続板の振動とスパンの最適化, (in Japanese), (Optimal Support Spacing for Vibration of Continuous, Orthotropic Plates of Variable Thickness under In-Plane Forces), 日本機械学会論文集(Transaction of JSME), Vol.56, No.531(C), (1990-11), pp.2841-2845.

44. Y. Narita and A.W. Leissa, Buckling studies for simply supported symmetrically laminated rectangular plates, International Journal of Mechanical Sciences, Vol.32,No.11, (1990), pp.909-924. (IF=1.542 /5)

43. O. Ichinomiya, Y. Narita, and K. Maruyama, Steady-state response analysis of elastically point-supported composite rectangular plates, JSME International Journal, Series III, Vol.33,No.3, (1990-9), pp.304-309.

42. Y. Narita, Free vibration analysis of cantilevered composite plates of arbitrary planform, JSME International Journal, Series III, 33-3 (1990-9), pp.291-296.

41. 成田吉弘(Y. Narita), 平面近似による一般形状を持つ三次元片持弾性体の振動解析法, (in Japanese), (Three Dimensional Vibration Analysis of Arbitrarily Shaped Elastic Bodies by Plane Approximation), 日本機械学会論文集(Transaction of JSME), Vol.56, No.525(C), (1990-5), pp.1125-1129.

40. Y. Narita, and N. Iwato, Vibration studies for symmetrically laminated circular and elliptical plates resting on elastic point supports, Composites Science and Technology, Vol.39, (1990-1), pp.75-88. (IF=3.556 /5)

39. 成田吉弘(Y. Narita), 一ノ宮修, 一般形状をもつFRP積層片持板の振動解析法, (in Japanese), (Vibration Analysis of Cantilevered Laminated Composite Plates with a General Planform), 日本機械学会論文集(Transaction of JSME), Vol.56, No.521C, (1990-1), pp.16-21.

38. 一ノ宮修, 成田吉弘(Y. Narita),丸山晃市, 弾性支持されたFRP積層板の振動解析, (in Japanese),  (Vibration Analysis of Laminated FRP Rectangular Plates Resting on Some Elastic Point Supports), 日本機械学会論文集(Transaction of JSME), Vol.55, No.520(C), (1989-12), pp.2939-2944.

37. 一ノ宮修, 成田吉弘(Y. Narita), 丸山晃市, FRP積層された片持長方形板の定常応答, (in Japanese), (Steady State Response of Laminated FRP Cantilevered Rectangular Plates), 日本機械学会論文集(Transaction of JSME), Vol.55, No.516(C), (1989-8), pp.1897-1902.

36. A.W. Leissa and Y. Narita, Vibration studies for simply supported symmetrically laminated rectangular plates, Composite Structures, Vol.12, (1989), pp.113-132. (IF=2.033 /5)

35. 成田吉弘(Y. Narita), 支持位置による連続体の固有振動数の最適化(第3報,隣接固有値差の最大化), (in Japanese), (Optimal Vibration Support of Continuous Systems : 3rd Report, Maximization of Difference Between Adjacent Frequencies), 日本機械学会論文集(Transaction of JSME), Vol.55, No.513(C), (1989-5), pp.1168-1171.

34. 一ノ宮修, 成田吉弘(Y. Narita), 丸山晃市, FRP積層長方形板の定常応答, (in Japanese), (Steady-State Response of Laminated FRP Rectangular Plates), 日本機械学会論文集(Transaction of JSME), Vol.55, No.511C, (1989-3), pp.549-554.

33. 成田吉弘(Y. Narita), 高橋一郎, 支持位置による連続体の固有振動数の最適化(第2報,変断面連続はりへの適用), (in Japanese), (Optimal Vibration Support of Continuous Systems : 2nd Report, Application to Continuous Beams of Variable Cross Section), 日本機械学会論文集(Transaction of JSME), Vol.55, No.510(C), (1989-2), pp.281-285.

32. 成田吉弘(Y. Narita), 支持位置による連続体の固有振動数の最適化(第1報,最適位置の探索法), (in Japanese), (Optimal Vibration Support of Continuous Systems : 1st Report, Search Algorithm for Optimal Location), 日本機械学会論文集(Transaction of JSME), Vol.54, No.507(C), (1988-11), pp.1319-1323.

31. Y. Narita and A.W. Leissa, Vibrations of completely free shallow shells of curvilinear planform, Journal of Applied Mechanics, Trans. ASME, Vol.53,No.3, (1986-9), pp.647-651. (IF=1.001 /5)

30. Y. Narita, Free vibration analysis of orthotropic elliptical plates resting on arbitrarily distributed point supports, Journal of Sound and Vibration, Vol.108,No.1, (1986-7), pp.1-10. (IF=1.572 /5)

29. Y. Narita, Vibration analysis of a rectangular plate resting on line supports by Lagrange multiplier-Fourier expansion approach, Journal of Applied Mechanics, Trans. ASME, Vol.53,No.2, (1986-6), pp.469-470. (IF=1.001 /5)

28. R.O. Grossi, P.A.A. Laura and Y. Narita,  A note on vibrating polar orthotropic circular plates carrying concentrated masses, Journal of Sound and Vibration, Vol.106,No.2, (1986-5), pp.181-186. (IF=1.572 /5)

27. 成田吉弘(Y. Narita), アンテナ構造要素の振動解析(第2報、衛星搭載用展開アンテナ), (in Japanese), (Vibration Analysis of Antenna Structural Elements : 2nd Report, Deployable Antenna for Communication Satellite), 日本機械学会論文集(Transaction of JSME), Vol.52, No.473(C), (1986-1), pp.288-293.

26. 成田吉弘(Y. Narita), アンテナ構造要素の振動解析(第1報、点支持されただ円形偏平かく), (in Japanese), (Vibration Analysis of Antenna Structural Elements : 1st Report, Point-supported Shallow Shell of Elliptical Planform), 日本機械学会論文集(Transaction of JSME), Vol.52, No.473(C), (1986-1), pp.55-60.

25. Y. Narita, The effect of nonuniform inplane loading on vibration of circular plates, Journal of Sound and Vibration, Vol.104,No.1, (1986-1), pp.165-168. (IF=1.572 /5)

24. Y. Narita, The effect of point constraints on transverse vibration of cantilever plates, Journal of Sound and Vibration, Vol.102,No.3, (1985-10), pp.305-313. (IF=1.572 /5)

23. Y. Narita, Vibration and stability of circular plates under partially distributed or concentrated inplane loads, Journal of Applied Mechanics, Trans. ASME, Vol.52,No.3, (1985-9), pp.549-552. (IF=1.001 /5)

22. Y. Narita, Free vibration of polar-orthotropic sector plates resting on point supports, Journal of Vibration, Acoustics, Stress and Reliability in Design, Trans. ASME, Vol.107,No.3, (1985-7), pp.334-338. (IF=0.701 /5)

21. Y. Narita, Natural frequencies of free, orthotropic elliptical plates, Journal of Sound and Vibration, Vol.100,No.1, (1985-5), pp.83-89. (IF=1.572 /5)

20. 成田吉弘(Y. Narita), 不均一な面内力を受ける円板の振動解析法, (in Japanese), (A Method for Vibration Analysis of Circular Plates under Nonuniform Inplane Loading), 日本機械学会論文集(Transaction of JSME), Vol.51, No.462(C), (1985-2), pp.240-247.

19. A.W. Leissa and Y. Narita, Vibrations of completely free shallow shells of rectangular planform, Journal of Sound and Vibration, Vol.96,No.2, (1984-10), pp.207-218. (IF=1.572 /5)

18. Y. Narita and A.W. Leissa, Vibrations of corner point supported shallow shells of rectangular planform, Earthquake Engineering and Structural Dynamics (IF=0.794), Vol.12, (1984-9), pp.651-661. (IF=1.720 /5)

17. Y. Narita, Note on vibrations of point supported rectangular plates, Journal of Sound and Vibration, 93-4 (1984-4), pp.593-597. (IF=1.572 /5)

16. Y. Narita, Free vibration of continuous polar-orthotropic annular and circular plates, Journal of Sound and Vibration, Vol.93,No.4, (1984-4), pp.503-511. (IF=1.572 /5)

15. Y. Narita, Natural  frequencies of completely free annular and circular plates having polar orthotropy, Journal of Sound and Vibration, Vol.92,No.1, (1984-1), pp.33-38. (IF=1.572 /5)

14. Y. Narita, Flexural vibration of clamped polygonal and circular plates having rectangular orthotropy, Journal of Applied Mechanics, Trans. ASME (IF=0.651), Vol.50,No.3, (1983-9), pp.691-692. (IF=1.001 /5)

13. K. Maruyama, O. Ichinomiya and Y. Narita, Experimental study of the free vibration of clamped trapezoidal plates, Journal of Sound and Vibration, Vol.88,No.4, (1983-6), pp.523-534. (IF=1.572 /5)

12. Y. Narita, K. Maruyama and M. Sonoda, Transverse vibration of clamped trapezoidal plates having rectangular orthotropy, Journal of Sound and Vibration, Vol.85,No.3, (1982-12), pp.315-322. (IF=1.572 /5)

11. Y. Narita, Vibration of a non-uniform cantilever beam partially immersed in an ideal liquid, Journal of Sound and Vibration, Vol.81,No.4, (1982-4), pp.583-586. (IF=1.572 /5)

10. Y. Narita, Application of a series-type method to vibration of orthotropic rectangular plates with mixed boundary conditions, Journal of Sound and Vibration, 77-3 (1981-7), pp.345-355. (IF=1.572 /5)

9. A.W. Leissa and Y. Narita, Vibrations of free circular plates having elastic constraints and added mass distributed along the segments, Journal of Applied Mechanics, Trans. ASME (IF=0.651), Vol.48,No.1, (1981-3), pp.196-198. (IF=1.001 /5)

8. Y. Narita and A.W. Leissa, Flexural vibrations of free circular plates elastically constrained along parts of the edge, International Journal of Solids and Structures, Vol.17,No.1, (1981-1), pp.83-92. (IF=2.067/5)

7. A.W. Leissa and Y. Narita, Natural frequencies of simply supported circular plates, Journal of Sound and Vibration, Vol.70,No.2, (1980-5), pp.221-229. (IF=1.572 /5)

6. Y. Narita and A.W. Leissa, Transverse vibration of simply supported circular plates having partial elastic constraints, Journal of Sound and Vibration, Vol.70,No.1, (1980-5), pp.103-116. (IF=1.572 /5)

5. T. Irie, G. Yamada, and Y. Narita, Free vibration of cross-shaped, I-shaped and L-shaped plates clamped at the edges, Journal of Sound and Vibration, Vol.61,No.4, (1978-12), pp.571-583. (IF=1.572 /5)

4. T. Irie, G. Yamada, and Y. Narita, Free vibration of clamped polygonal plates, Bulletin of JSME, Vol.21,No.162, (1978-12), pp.1696-1702.

3. 入江敏博, 山田元, 成田吉弘(Y. Narita), 周辺で固定された正多角形板の自由振動, (in Japanese), (Free vibration of clamped plates), 日本機械学会論文集(Transaction of JSME), Vol.44, No.380, (1978-4), pp.1196-1204.

2. T. Irie, G. Yamada, and Y. Narita, Free vibration of a rectangular plate supported on the sides and some segments, Bulletin of JSME, Vol.20,No.147, (1977-9), pp.1085-1092.

1. 入江敏博, 山田元, 成田吉弘(Y. Narita), 周辺と内部の線分で支持された長方形板の自由振動, (in Japanese), (Free Vibration of a Rectangular Plate supported at Boundary and Internal Line Segments), 日本機械学会論文集(Transaction of JSME), Vol.43, No.365, (1977-1), pp.95-104.

————————————————————-

Thesis

 

Dr. of Eng.: Yoshihiro Narita, Available at URI:  http://hdl.handle.net/2115/32630, Free Vibration of Elastic Plates with Various Shapes and Boundary Conditions, GraduateSchool of Engineering,HokkaidoUniversity (1980.3)

Master : Yoshihiro Narita, Available at URI:  http://hdl.handle.net/2115/32630, Free Vibration of a Plate with Various Boundary Conditions, Graduate School of Engineering, Hokkaido University (1976.3)

国際会議 Internaional Conference Proceedings

  1. under construction

基調講演 Plenary speech, Keynote speech

Internaional Conference Proceedings

  1. XXXXXX
  1. XXXXXX
  • ccc

国際会議 Internaional Conference Proceedings

  • ccc

受賞,共著者の受賞 Awards by Narita, Co-workers s

    1. XXXXXX
    2. 国際会議 Internaional Conference Proceedings
    3. XXXXXX

国内講演 Domestic Conference Proceedings

  1. XXXXXX

紀要 Reseach Institute Journals

  1. XXXXXX

 

コメントは停止中です。