Research achievement (Honda)

主な研究業績 査読付き論文,Refereed Journal Publications

  1. Kazuaki Katagiri, Katsuhiko Sasaki, Shinya Honda, Hikaru Nakashima, Yusuke Tomizawa, Shimpei Yamaguchi,  Tomoatsu Ozaki, Hirosuke Sonomura, Atsushi Kakitsuji, Resin molding by using electro-activated deposition for efficient manufacturing of carbon fiber reinforced plastic,Composite Structures
    Volume 182, 15 December 2017, Pages 666-673.
  2. Kazuaki KATAGIRI, Katsuhiko SASAKI, Shiniya HONDA, Hikaru NAKASHIMA, Shimpei YAMAGUCHI, Tomoatsu OZAKI, Hirosuke SONOMURA and Atsushi KAKITSUJI, CFRP Manufacturing Method using Electrodeposition Resin Molding for Curvilinear Fiber Arrangements, Composites Part A: Applied Science and Manufacturing, Volume 102, November 2017, Pages 108–116
  3. Yoshihiko Kaito, Shiya HONDA, Yoshhiro Narita, Identification of Elastic Edge Condition for Modelling Vibration Response of Glass Touch Panel, Journal of Vibration Control, 2017, DOI: 10.1177/1077546317719193
  4. Shinya Honda, Yoshihiro Narita, Vibration analysis and optimization of sandwich composite with curvilinear fibers, Journal of Physics: Conference Series, Vol. 744, No. 1, 2016. [DOI: 10.1088/1742-6596/744/1/012020]
  5. Yohihiko Kaito, Shinya Honda, Yoshihiro Narita, Vibration characteristics and optimization for panel elastically supported in mobile phone, Journal of Physics: Conference Series, Vol. 744, No. 1, 2016. [DOI: 10.1088/1742-6596/744/1/012194]
  6. Shinya Honda, Yoshihiro Narita, Itsuro Kajiwara, Multi-objective optimization for vibration suppression of smart laminated composites, Mechanical Engineering Journal, Special Issue on Systems Design for Motion and Vibration Control (MEJ:DR), Vol. 3, No. 1 2016. [DOI: 10.1299/mej.14-00561]
  7. 本田 真也,髙橋 圭佑,成田 吉弘, 双安定性を有する複合材シェルのスナップスルー変形に関する多目的最適化, 日本機械学会論文集,Vol. 81, No. 824 (2015).
  8. Shinya HONDA, Takahito KUMAGAI, Kazuya TOMIHASHI, Yoshihiro NARITA, Frequency maximization of laminated sandwich plates under general boundary conditions using layerwise optimization method with refined zigzag theory, Journal of Sound & Vibration, Vol. 332 (2013), pp. 6451-6462.
  9. Shinya HONDA, Teruki IGARASHI and Yoshihiro NARITA, “Multi-Objective Optimization of Curvilinear Fiber Shapes for Laminated Composite Plates by Using NSGA-II”, Composites Part B: Engineering, Vol. 45, 2013, 1071-1078.
  10. 和田 将明,本田 真也,成田 吉弘,遠心力を受ける複合材積層板の振動解析,日本機械学会論文集(C編),78巻,789号,pp. 1586-1595.
  11. Shinya Honda and Yoshihiro Narita, Natural Frequencies and Vibration Modes of Laminated Composite Plates Reinforced with Arbitrary Curvilinear Fiber Shape Paths, Journal of Sound & Vibration, Vol. 331 (2012) pp. 180-191.
  12. Shinya Honda, Takeru Kato, Yoshihiro Narita, and Daisuke Narita, Multidisciplinary Design Optimization of Surface Shapes and Lay-up Configurations for Laminated Composite, Journal of System Design and Dynamics, JSME, Vol.5, No.8 (2011), pp.1662-1673.
  13. Shinya Honda, Itsuro Kajiwara, and Yoshihiro Narita, Multidisciplinary Design Optimization for Vibration Control of Smart Laminated Composite Structures, Journal of Intelligent Material Systems and Structures, Vol. 22, No. 13, (2011), pp. 1419-1430.
  14. 本田 真也,加藤 大翔,成田 吉弘,成田 大祐,繊維強化複合材シェルの曲面形状と積層構成の統合最適化,日本機械学会論文集(C編),Vol. 77, No. 777 (2011), pp. 1793-1802.
  15. Shinya Honda and Yoshihiro Narita, Vibration Design of Laminated Fibrous Composite Plates with Local Anisotropy Induced by Short Fibers and Curvilinear Fibers,Composite Structures,Vol. 93 (2011), pp. 902-910.
  16. 本田 真也,大渡 康介,成田 吉弘,曲線状繊維によって強化された複合材積層板の応力集中最小化, 日本機械学会集(A編), Vol. 76, No. 769 (2010), pp. 1139-1146.
  17. 上甲 康之,本田 真也,成田 吉弘,実験計画法を用いた複合材料構造の多目的最適化, 日本機械学会集(C編), Vol. 76, No. 765 (2010), pp. 1062-1067.
  18. 本田 真也,大西 良昌,成田 吉弘,曲線状繊維によって強化された複合材積層板の座屈解析,日本機械学会論文集(C編),Vol. 76, No. 765 (2010), pp. 1056-1061.
  19. Shinya Honda, Yoshihiro Narita and Katsuhiko Sasaki, Discrete Optimization for Vibration Design of Composite Plates by Using Lamination Parameters,Advanced Composite Materials,Vol.18 (2009), pp.297-314.
  20. Shinya Honda, Yoshihiro Narita and Katsuhiko Sasaki, Maximizing the Fundamental Frequency of Laminated Composite Plates with Optimally Shaped Curvilinear Fibers,Journal of System Design and Dynamics, JSME,Vol.3, No.6 (2009), pp.867-876.
  21. 本田 真也,成田 吉弘,佐々木 克彦,繊維形状最適化による複合材積層板の固有振動数最大化,日本機械学会論文集(C編), Vol.75, No.753 (2009), pp.1244-1250.
  22. 本田 真也,Stefan BERGER,成田 吉弘:固有振動数データを用いた偏平シェルの境界条件同定,日本機械学会論文集(C編)ノート,74(742)(1676-1677)(2008)
  23. 本田 真也,Jacob A. ANDKJAR,成田 吉弘:汎用FEMの援用による複合材料構造の層別最適化,日本機械学会論文集(C編)ノート,74(743)(1926-1927)(2008)
  24. Shinya HONDA and Yoshihiro NARITA:Design for the Maximum Natural Frequency of Laminated Composite Plates by Optimally Distributed Short Fibers,Journal of System Design and Dynamics,JSME, Vol. 2, No. 6, pp.1195-1205(2008)
  25. 本田 真也,成田 吉弘:最適な短繊維分布による複合材積層板の固有振動数最大化,日本機械学会論文集(C編),Vol. 74, No. 741 pp. 1049-1055, (2008)
  26. Shinya HODNA, Yoshimasa OONISHI, Yoshihiro NARITA, Katsuhiko SASAKI:Vibration Analysis of Composite Rectangular Plates Reinforced along Curved Lines,Journal of System Design and Dynamics,JSME, Vol. 2, No. 1 pp. 76-82(2008)
  27. Shinya HONDA, Yoshihiro NARITA, Katsuhiko SASAKI:Optimization for the Maximum Buckling Loads of Laminated Composite Plates — Comparison of Various Design Methods,Key Engineering Materials,Vols. 334-335, pp. 89-92 (2007)
  28. 本田 真也,成田 吉弘:積層パラメータの離散誤差最小化による複合材料積層板の座屈特性最適化,日本機械学会論文集(A編),Vol. 72, No.720, pp. 1262-1269 (2006)

国際会議, International Conference Proceedings

  1. S. Honda, Y. Narita, “Vibration analysis and optimization of sandwich composite with curvilinear fibers”, Proceedings of 13th International Conference on Motion and Vibration control (MoViC 2016) and 12th International Conference on Recent Advances in Structural Dynamics (RASD 2016), 3-6 July, 2016, Univ. of Southampton, Southampton, UK, No. 2289 (査読有).
  2. ○Y. Kaito, S. Honda, Y. Narita, “Vibration characteristics and optimization for panel elastically supported in mobile phone”, Proceedings of 13th International Conference on Motion and Vibration control (MoViC 2016) and 12th International Conference on Recent Advances in Structural Dynamics (RASD 2016), 3-6 July, 2016, Univ. of Southampton, Southampton, UK, No. 2341 (査読有).
  3. ○Gaku Yokoyama, Shinya Honda, Yoshihiro Narita, “Optimal design with response surface method for aeroelastic behavior of wing shaped composite plates”, Proceedings of 17th US-Japan Conference on Composite Material (US-Japan 2016), Hokkaido Univ., Sapporo, Japan, August 1-2, 2016, USB No. 34.
  4. ○Kazutoshi Tamai, Shinya Honda, Yoshihiro Narita, “Vibration characteristics of laminated composites with curvilinear reinforcing fibers by using tailored fiber placement machine”, Proceedings of 17th US-Japan Conference on Composite Material (US-Japan 2016), Hokkaido Univ., Sapporo, Japan, August 1-2, 2016, USB No. 62.
  5. Shinya HONDA, “Multi-objective optimization of laminated composite fabricated by tailored fiber placement machine”, Proceedings of 17th US-Japan Conference on Composite Material (US-Japan 2016), Hokkaido Univ., Sapporo, Japan, August 1-2, 2016, USB No. K3, Keynote lecture.
  6. ○T. Tampo, S. Honda, Y. Narita, Buckling Analysis of Laminated Shallow Shells under General Form Pressure and Boundary Condition, Proceedings of the 16th Asian Pacific Vibration Conference (APVC2015), November 24-26, 2015, Hanoi University of Science and Technology, Hanoi, Vietnam (USB).
  7. ○T. Hayashi, S. Honda, Y. Narita, Benchmark Test Function for Assessing the Lay-up Optimization Methods in Plate Vibration, Proceedings of the 16th Asian Pacific Vibration Conference (APVC2015), November 24-26, 2015, Hanoi University of Science and Technology, Hanoi, Vietnam (USB).
  8. ○S. Honda, T. Kumagai, Y. Narita, Vibration optimization of composite sandwich plate with soft core by using refined zigzag theory, Proceedings of the 16th Asian Pacific Vibration Conference (APVC2015), November 24-26, 2015, Hanoi University of Science and Technology, Hanoi, Vietnam (USB).
  9. ○Y. Kaito, S. Honda, Y. Narita, Vibration of glass panel fixed by adhesive tape of mobile phone, Proceedings of the 16th Asian Pacific Vibration Conference (APVC2015), November 24-26, 2015, Hanoi University of Science and Technology, Hanoi, Vietnam (USB).
  10. ○S. Tanaka, S. Honda, Y. Narita, Robust design of a composite antenna structure by using multi-objective Taguchi method, Proceedings of the 16th Asian Pacific Vibration Conference (APVC2015), November 24-26, 2015, Hanoi University of Science and Technology, Hanoi, Vietnam (USB).
  11. ○F. Nishioka, S. Honda , Y. Narita, Vibration analysis and stacking sequence optimization of laminated rectangular plate with blended layers,  Proceedings of the 16th Asian Pacific Vibration Conference (APVC2015), November 24-26, 2015, Hanoi University of Science and Technology, Hanoi, Vietnam (USB).
  12. ○S. Honda, N. Kida, and Y. Narita, Adaptive Control for Vibration Suppression by Using Self-organization Map, IEEE Conference Publications, Proceedings of 10th Asian Control Conference 2015 (ASCC2015), 31st May – 3rd June, Sutera Harbour Resort, Kota Kinabalu, Sabah, Maraysia, USB ID 1570075227, DOI : 10.1109/ASCC.2015.7244696
  13. ○Y. Kaitou, S. Honda, Y. Narita, Free vibration of glass rectangular plates, Proceedings of 4-th Korea-Japan Joint Symposium on Dynamics and Control, Bexco, Busan, Korea, May 21-22, 2015, pp.119-120.
  14. Kaitou, Y., Honda, S. and ○Narita, Y., Dynamic response of panel models in mobile phone, Proc. The Second Intl. Conf. on Advances in Civil, Structural and Mechanical Engineering (CSM2014),  16-17 November 2014, Birmingham, UK, CD-rom, pp.214-217.
  15. ○Funamizu, T., Honda, S. and Narita, Y., Maximization of Natural Frequencies for Composite Laminated Plate with Rigid Body, Proceedings of the 9th Asian-Asutralasian Conference on Composite Materials (ACCM9), Suzhou, China, October 15-17, 2014, CD-ROM, ACCM9-C-001.
  16. ○Kumagai, T., Honda, S. and Narita, Y., Vibration Analysis of the Passive Constrained Layer Damping Plate by using Zigzag Theory, Proceedings of the 9th Asian-Asutralasian Conference on Composite Materials (ACCM9), Suzhou, China, October 15-17, 2014, CD-ROM, ACCM9-T-003.
  17. ○Takeno, K., Honda, S. and Narita, Y.,Effect of Bias, Hoop and Straight Layers on Vibration Characteristics of CFRP Circular Shafts, Proceedings of the 9th Asian-Asutralasian Conference on Composite Materials (ACCM9), Suzhou, China, October 15-17, 2014, CD-ROM, ACCM9-H-005.
  18. Narita, Y., Honda, S. and Funamizu, T., Vibration analysis of laminated composite plates having rigid body attachments, Proceedings of the American Society for Composites: Twenty-Ninth Technical Conference, La Jolla, California, September 8–10, 2014. American Society for Composites, CD-ROM—11 pp.426-433.
  19. Tsukada, T., Takeda, S., Iwahori, Y., Honda, S., Nrita, Y., Minakuchi, S., Takeda, N., Evaluation of residual strain in press molding of CF/PPS laminates using FBG sensors, Proceedings of the American Society for Composites: Twenty-Ninth Technical Conference, La Jolla, California, September 8–10, 2014. American Society for Composites, CD-ROM—11 pp.722-734.
  20. Naohiro Kida, Shinya Honda, Yoshihiro Narita, Adaptive vibration control using self-organizing map, The 12th International Conference on Motion and Vibration Control (MoViC2014), Sapporo Convention Center, Sapporo, 3B11, USB.
  21. Shinya Honda, Kazuki Watanabe, Yoshihiro Narita, Itsuro Kajiwara, Multi-objective optimization for vibration suppression of smart laminated composites, The 12th International Conference on Motion and Vibration Control (MoViC2014), Sapporo Convention Center, Sapporo, 3B31, USB.
  22. Shinya HONDA, Kazuki WATANABE, Yoshihiro NARITA and Itsuro KAJIWARA, Optimum Design and Experimental Evaluation for Smart Micro-composites by Using Laser Excitation Technique, Proceedings of the 9th International Symposium on Vibrations of Continuous Systems (ISVCS9), Courmayeur, Italy, 21-26 July 2013, pp.28-30.
  23. Yoshihiro NARITA, Shinya HONDA and Takahiro FUNAMIZU, Analysis and Lay-up Optimization for Vibration of Laminated Composite Plate with Rigid Body Attachments, Proceedings of the 9th International Symposium on Vibrations of Continuous Systems (ISVCS9), Courmayeur, Italy, 21-26 July 2013, pp. 55-57.
  24. Yoshihiro NARITA and Shinya HONDA Is lay-up optimization possible for buckling of quasi-isotropic composite plates?, Proceedings of ICCS2013, 20 June, 2013, Porto, Portugal.
  25. Yoshihiro NARITA, Daisuke NARITA, Shinya HONDA, Vibration Suppression of Automobile Composite Panels, Proceedings of the 15th Asia Pacific Vibration Conference 2 – 6 June 2013, ICC JEJU, Jeju Island, Korea, W2_302_1, USB.
  26. Yoshihiro NARITA, Daisuke NARITA, Shinya HONDA, Vibration Suppression of Automobile Composite Panels, Proceedings of the 15th Asia Pacific Vibration Conference 2 – 6 June 2013, ICC JEJU, Jeju Island, Korea, W2_302_1, USB.
  27. Keisuke TAKAHASHI, Shinya HONDA, Yoshihiro NARITA, Vibration Analysis for Thermally Induced Bi-stable Composite Shallow Shell, Proceedings of the 15th Asia Pacific Vibration Conference 2 – 6 June 2013, ICC JEJU, Jeju Island, Korea, T1_301A_1, USB.
  28. Ryo Tsubata, Shinya HONDA, Yoshihiro NARITA, Vibration Optimization of Fibrous Composite Reinforced by Curvilinear Fibers, Proceedings of 15th Asia Pacific Vibration Conference  (APVC-15) 2 – 6 June 2013, ICC JEJU, Jeju, Korea, M3_303B_2, USB.
  29. Kazuki WATANABE, Shinya HONDA, Yoshihiro NARITA, Itsuro KAJIWARA, Maximization of Vibration Control Performance for Micro Smart Composites with the Laser Excitation Technique, Proceedings of the 15th Asia Pacific Vibration Conference 2 – 6 June 2013, ICC JEJU, Jeju Island, Korea, M1_303B_1, USB.
  30. Keisuke TAKAHASHI, Shinya HONDA, Yoshihiro NARITA, Vibration Characteristics of Bi-stable Asymmetrically Laminated Composite Shell, Proceedings of 8th Asian-Australasian Conference on Composite Materials (ACCM-8) 6 – 8 November 2012, KLCC, Kuala Lumpur, Malaysia, O-DES-092, CD-ROM.
  31. Yuta ISHIBASHI, Shinya HONDA, Yoshihiro NARITA, Static and Vibration Optimization of Composite Structures with 3-D Local Anisotropy, Proceedings of 8th Asian-Australasian Conference on Composite Materials (ACCM-8) 6 – 8 November 2012, KLCC, Kuala Lumpur, Malaysia, O-DES-094, CD-ROM.
  32. Teruki IGARASHI,  Shinya HONDA, Yoshihiro NARITA, Multi-objective Optimization of Fibrous Composites with Curvilinear Fibers for Mechanical Properties and Fiber Geometries, Proceedings of 8th Asian-Australasian Conference on Composite Materials (ACCM-8) 6 – 8 November 2012, KLCC, Kuala Lumpur, Malaysia, O-DES-142, CD-ROM.
  33. Kou KOSAKA, Shinya HONDA, Yoshihiro NARITA, Multidisciplinary Design Optimization of Smart Composite Shell for Vibration Suppression, Proceedings of 8th Asian-Australasian Conference on Composite Materials (ACCM-8) 6 – 8 November 2012, KLCC, Kuala Lumpur, Malaysia, O-SMA-093, CD-ROM.
  34. Kazuya TOMIHASHI, Shinya HONDA, Yoshihiro NARITA, Experimental Modal Analysis of Passive Constrained Layer Damping Plate Using CFRP Material, Proceedings of 8th Asian-Australasian Conference on Composite Materials (ACCM-8) 6 – 8 November 2012, KLCC, Kuala Lumpur, Malaysia, O-TEM-185, CD-ROM.
  35. Shinya HONDA, Kazuki WATANABE, Yoshihiro NARITA, and Itsuro KAJIWARA, Multidisciplinary Design Optimization for Smart Micro-Composite and Experimental Validation by Using Laser Excitation Technique, Proceedings of  11th Motion & Vibration Conference (MOVIC),  Oct. 17-19, 2012, Hilton Fort Lauderdale Marina, Ft. Lauderdale, FL, USA, pp. 777-784.
  36. Yoshihiro NARITA and Shinya HONDA: Vibration Optimization of Laminated Composite Rectangular Plates with General Elastic Edge Restraints, Proceedings of the US-Japan conference of Composite Materals ASTM-D30 Meeting, Oct 1-3, 2012, Arlington, TX, US, pp. 284-295.
  37. Yoshihiro NARITA, Shinya HONDA, and Naoaki KOYA, VIBRATION ANALYSIS OF LAMINATED VGCF/ALUMINUM CIRCULAR PLATES WITH EXPERIMENTAL VERIFICATION, Proceedings of the International Conference on Mechanics of Nano, Micro and Macro Composite Structures, June 18-20, 2012,  Politecnico di Torino, Italy, No. 427.
  38. Shinya HONDA, Yoshihiro NARITA, Itsuro KAJIWARA, and Satoshi NAKAMURA, Vibration Testing Method of Smart Micro-Composite with Laser Excitation, Proceedings of The 14th Asia-Pacific Vibration Conference (APVC14), December 5th-8th, HongKong SAR, China, pp. 1462-1470.
  39. Yoshihiro NARITA and Shinya HONDA, The Effect of Internal Line Supports on Optimum Lay-up Design for Vibration of Laminated Rectangular Plates, Proceedings of The 14th Asia-Pacific Vibration Conference (APVC14), December 5th-8th, HongKong SAR, China, pp. 987-995.
  40. Shinya HONDA, Kou KOSAKA, Yoshihiro NARITA, and Itsuro KAJIWARA, DESIGN OF SMART COMPOSITE FOR VIBRATION SUPPRESSION USING LAMINATION PARAMETERS, Proceedings of the 18th International Conference on Composite Material (ICCM18), August 21-26, 2011, Jeju, Korea, IF0541(USB)
  41. Yoshihiro NARITA, Shinya HONDA, Takeru KATO, and Daisuke NARITA: Vibration Optimization of Composite Laminated Shallow Shells with respect to Surface Shapes and Lay-ups, Proceedings of 8th International Symposium on Vibration of Continuous Systems (ISVCS8), July 17-23, Whistler, British Columbia, Canada, pp. 40-42.
  42. Shinya HONDA and Yoshihiro NARITA: Study on Vibration Design of Laminated Fibrous Composite Plates Reinforced by Short Fibers and Curvilinear Fibers, Proceedings of 8th International Symposium on Vibration of Continuous Systems (ISVCS8), July 17-23, Whistler, British Columbia, Canada, pp. 16-18.
  43. Shinya HONDA, Teruki IGARASHI, and Yoshihiro NARITA: MULTI-OBJECTIVE OPTIMIZATION FOR FIBROUS COMPOSITE REINFORCED BY CURVILINEAR FIBERS, Proceedings of 9th World Congress on Structural and Multidisciplinary Optimization (WCSMO-9), June 13 -17, 2011, Shizuoka, Japan, (CD-ROM).
  44. Yoshihiro Narita, Shinya Honda, Takeru Kato, Daisuke Narita:Analytical and experimental study on vibration of laminated shallow shells with variable shape and lay-up, Proceedings of the Second Korea-Japan Joint Symposium on Dynamics and Control, Busan, Korea, (2011-5), pp.224-227.
  45. Takashi Koshiba, Shinya Honda, and Yoshihiro Narita, Analysis, Experiment and Cost Design for Vibration of Hybrid Laminated Plates, The 7th Asian-Australasian Conference on Composite Material(ACCM-7), Taipei, Taiwan(2010-11), (CD-ROM, THU-SE32-01).
  46. Toshinori Fujii, Shinya Honda, and Yoshihiro Narita, Vibration Optimization of Laminated Parallelogram Plates with Experimental Verification, The 7th Asian-Australasian Conference on Composite Material(ACCM-7), Taipei, Taiwan(2010-11), (CD-ROM, THU-SE29-03)
  47. Shinya Honda, Kosuke Owatari and Yoshihiro Narita, Optimization of Fibrous Composite Plates for In-Plane Strength Using Curvilinear Fibers, The 7th Asian-Australasian Conference on Composite Material(ACCM-7), Taipei, Taiwan(2010-11), (CD-ROM, THU-SE29-02)
  48. Naoaki Koya, Shinya Honda, Katsuhiko Sasaki and Yoshihiro Narita, Analytical and experimental study for vibration of laminated VGCF/Al circular plate, The 7th Asian-Australasian Conference on Composite Material(ACCM-7), Taipei, Taiwan(2010-11), (CD-ROM, Wed-SE27-02)
  49. Shinya Honda, Itsuro Kajiwara, Yoshihiro Narita: Multidisciplinary design optimization of actuator arrangements, lay-up configurations and control systems for smart laminated composite structures, ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems(SMASIS 2010), Philadelphia, USA, (2010-9), (CD-ROM, SMASIS2010-3661).
  50. Yoshihiro Narita, Shinya Honda, Claire Couppie: Layerwise Optimization for Vibration of Automobile Composite Panels, Proceedings of 17th International Congress on Sound and Vibration (ICSV-17), Cairo, Egypt, (2010-7), (CD-ROM).
  51. Shinya Honda, Kosuke Owatari, Yoshihiro Narita:Static design for the fibrous composite plates reinforced by curvilinearly shaped fibers, Proceedings of 14th European Conference on Composite Materials (ECCM-14),Budapest, Hungary, (2010-6), USB, p63(PaperID: 989-ECCM14).
  52. Shinya Honda, Kosuke Owatari, Yoshihiro Narita:Vibration Design of Composite Plates with Curvilinear Fibers, Proceedings of 13th Asia Pacific Vibration Conference,Christchurch, New Zealand, (2009-11), CD-ROM, pp.1-9.
  53. Shinya HONDA, Kosuke OWATARI, Yoshihiro NARITA, Analysis and Design for the Fibrous Composite Plates Reinforced by Curvilinear Fibers, Proceedings of the 7th Japan-Korea Joint Symposium on Composite Materials, (2009-9), Kanazawa, Japan, pp.247-248.
  54. Yasuyuki JOKO, Shinya HONDA and Yoshihiro NARITA, Comparison between Design of Experiments and Other Methods for Optimization of Vibrating Composite Plates, Proceedings of The First Japan-Korea Joint Symposium on Dynamics and Control, Sapporo, Japan, (2009-8), pp.125-126.
  55. Matthieu MICHELETTI, Shinya HONDA and Yoshihiro NARITA, Layerwise Optimization for Vibration of Main wing Composite Structures, Proceedings of The First Japan-Korea Joint Symposium on Dynamics and Control, Sapporo, Japan, (2009-8), pp.45-46.
  56. Claire COUPPIE, Shinya HONDA and Yoshihiro NARITA, Layerwise Optimization for Vibration of Automobile Panels, Proceedings of The First Japan-Korea Joint Symposium on Dynamics and Control, Sapporo, Japan, (2009-8), pp.37-38.
  57. Ryoji AOKI, Shinya HONDA and Yoshihiro NARITA, Stacking Sequence Optimization for Vibration of Twisted Composite Panels, Proceedings of The First Japan-Korea Joint Symposium on Dynamics and Control, Sapporo, Japan, (2009-8), pp.23-24.
  58. 本田 真也,成田 吉弘,佐々木 克彦,曲線状繊維によって強化された複合材積層板の固有振動数最大化,第1回日中板・シェル理論の基礎と応用シンポジウム論文集,(2009-3), 燕山大学,秦皇島,中国, pp.89-94.
  59. Shinya HONDA, Yoshimasa OONISHI, Yoshihiro NARITA, Katsuhiko SASAKI:Vibration analysis of fibrous composite plates reinforced along arbitrary curvilinear fiber shapes,Proceedings of 15th International Congress of Sound and Vibration (ICSV-15),(1514- )(2008)
  60. Shinya HONDA, Yoshimasa OONISHI, Yoshihiro NARITA, and Katsuhiko SASAKI:Vibration analysis of laminated composite plates reinforced by arbitrarily shaped curvilinear fibers,Proceedings of 6th Asia-Australasian Conference on Composite Materials (ACCM-6), (347-350)(2008)
  61. Shinya HONDA, Yoshihiro NARITA:Design of composite plate with optimally distributed short fibers,Proceedings of 16th International Conference on Composite Materials(ICCM-16),(CD-ROM, MoKA1-03)(2007)
  62. Shinya HONDA, Yoshihiro NARITA:Minimum weight design for vibration of laminated plates using lamination parameters,Proceedings of First International Conference on Multidisciplinary Design Optimization and Applications(ASMDO),(CD-ROM, Shinya Honda)(2007)

研究助成,Research Grant

科学研究費補助金

  1. 科学研究費補助金,基盤研究(C),「自由繊維形状を有する新機能熱可塑性複合材の開発」(代表),2017-2019.
  2. 科学研究費補助金,基盤研究(B),「形状双安定性を有する新機能複合材シェルの開発」(代表),2014-2016.
  3. 科学研究費補助金,挑戦的萌芽研究,「自己組織化マップによるインテリジェント学習制御手法の開発」(代表),2014-2015.
  4. 科学研究費補助金,若手研究(B),「広帯域安定駆動を目的としたマイクロ・スマート複合材の開発」(代表),2012-2013.
  5. 科学研究費補助金,基盤研究(A),「大曲率3Dコンポジットの動的設計と航空・自動車構造への機能創出」(分担),2012-2016.
  6. 科学研究費補助金,基盤研究(A)一般,「パルスレーザーを用いた非接触加振に基づく高周波振動計測/高感度異常検知技術の開発」(分担),2010-2013.
  7. 科学研究費補助金,若手研究(B),「コンポジット圧電素子による局所異方性振動モード制御」(代表),2010-2011.
  8. 科学研究費補助金,特別研究員奨励,「新機能複合材料の力学解析法と最適設計法の開発」(代表),2007-2008.

その他

  1. 戦略的イノベーション創造プログラム(SIP),航空機用高生産性革新PMCの製造・品質保証技術の開発,ユニットA11「高生産性・強靭複合材の開発」(機関代表),2016-2018
  2. 財団法人 新生資源協会(H25よりフジクラ財団へ名称変更) 研究助成,「CFRP管体の動特性に関する研究」,(代表),2012-2013.
  3. 北海道立総合研究機構 重点研究「高度な金型設計技術とサーボプレスの動作制御技術を組み合わせた高精度プレス加工技術の開発」(分担),2011-2012.
  4. エネルギー総合工学研究所 革新的実用原子力技術開発費補助事業,(原子力の基盤技術分野強化プログラム),「原子力施設用配管の耐震尤度評価法と耐震性向上技術に関する開発」(H22年度のみ分担) 2007-2010.

受賞,Award

  1. 2016年度日本機械学会賞(論文),「双安定性を有する複合材シェルのスナップスルー変形に関する多目的最適化」, 2017.4.20
  2. 日本機械学会機械力学計測制御部門オーディエンス表彰,341 「双安定性を有する複合材シェルのスナップスルー変形に関する多目的最適化」, 2015年8月27日.
  3. 日本機械学会 奨励賞(研究),2011.4.21 「局所的な異方性を有する繊維強化複合材料の解析と最適設計の研究」,
  4. 第53回自動制御連合講演会,優秀発表賞, 2011.1 受賞論文: 「積層複合材のスマート化による振動制御を目的とした統合最適化」
  5. ASMDO(Association for Simulation and Mulitidisciplinary Design Optimization), First International Conference on Multidisciplinary Design Opitmization and Applications,Excellent Papaer Award, April, 2007 Paper Title:  “Minimum weight design for vibration of laminated plates using lamination parameters”
  6. 日本機械学会 三浦賞,第501号,2007.3

その他, Other

  1. 本田真也,成田吉弘,自由な強化繊維形状を有する先端複合材料の最適設計,第17回計測自動制御学会システムインテグレーション部門講演会(SI2016),2016.12.15,札幌コンベンションセンター,札幌市,USB論文集,講演番号1O2-1,Keynote Lecture.
  2. Shinya HONDA, “Multi-objective optimization of laminated composite fabricated by tailored fiber placement machine”, Proceedings of 17th US-Japan Conference on Composite Material (US-Japan 2016), Hokkaido Univ., Sapporo, Japan, August 1-2, 2016, USB No. K3, Keynote lecture.
  3. 本田真也,「曲線状強化繊維を用いた翼構造要素の最適化の可能性」,日本機械学会2015年度年次大会,械力学・計測制御部門 先端技術フォーラム【F10200】,「宇宙工学部門企画 最近の航空機構造の話題」北海道大学,札幌市, 9.16.
  4. S. Honda, Multi-objective Optimization of Curvilinear Fiber Shapes for Laminated Composite Plates by Using NSGA-II, 5th Symposium on Academic Exchange and Collaborative Research between ETH Zurich and Hokkaido University, Zurich, Switzerland, 27-28 November, 2014.
  5. 本田 真也,「タッチパネルの振動応答強化について」,日本機械学会シェルの振動と座屈研究会2014セミナー,中部大学,春日井市,2014.11.14.
  6. 本田 真也,「スイス連邦工科大学チューリッヒ校(ETHZ)における在外研究報告」,日本機械学会北海道支部 材料・材料強度・加工懇話会講演会,北見工業大学,北見市,2014.11.7
  7. 本田 真也,在外研究報告 「スイス連邦工科大学チューリッヒ校(ETHZ)に滞在して」,第 25 回(平成 26 年度)振動基礎研究会,金沢大学角間キャンパス,金沢市,2014.9.22-23.
  8. Y. NARITA, S. HONDA and K. OWATARI, Analysis and Lay-up Optimization for Vibration of Laminated Plates with Complex Shape and Edge Conditions, International Conference on Mechanics and Materials Engineering (ICMME2014), April 12-13, 2014, Xi’an, China.
  9. 本田 真也,「曲線状繊維複合材およびスマート複合材の最適設計に関する研究」, 日本機械学会,計算力学部門,設計情報学研究会,Design Informatics (DI) Lecture Series 4, 北海道工業大学 芦原ニセコ山荘, 2013. 6.7.
  10. Shinya Honda, Multi-objective optimization of curvilinear fiber shapes for laminated composite platesUK-Japan Workshop on Composites, University of Bristol, 25 March, 2013.
  11. Shinya Honda, Kumpei Yugami and Yoshihiro Narita, “Placement optimization of reinforcement patches for CFRP laminated composite plate for the maximum fundamental frequency”, the 10th International Conference on Sandwich Structures (ICSS-10), 2012, 8.27-8.29,  Nantes, France (abstract & presentation only).
  12. Yoshihiro Narita, Shinya Honda and Takashi Koshiba, “Lay-up optimization for vibration of sandwich plate composed of CFRP skins and aluminum core”, the 10th International Conference on Sandwich Structures (ICSS-10), 2012, 8.27-8.29,  Nantes, France (abstract & presentation only).
  13. 本田 真也,他30名,第18回国際複合材料会議報告,日本複合材料学会誌,Vol.38,No.2,2012,pp. 67-84.
  14. 本田 真也,スマート複合材料の振動制御に関する統合最適化,第14回「スマート構造システムの将来技術と実用化に関する研究会」,話題提供,芝浦工業大学,2010.11.2

コメントは停止中です。