学術論文:2015年

学術論文 2015年

1. Phase-Field Simulation and Analysis of Effect of Dispersed Particles on Migration of Delta to Gamma Transformation Interface

Metall. and Mat. Trans. A, Vol. 46A (2015), No. 2, pp. 981-988. 
Daisuke Sato, Munekazu Ohno and Kiyotaka Matsuura

2. Effect of (Ti:B) atomic ratio on mechanical properties of TiB2–Fe composites “in situ” fabricated via Self-propagating High-temperature Synthesis

Materials & Design, Volume 69, 15 March 2015, Pages 1-11
Marta Ziemnicka-Sylwester, Li Gai, Seiji Miura

3. Sensitivity analysis for thickness uniformity of Al coating layer in extrusion of Mg/Al clad bar

Int. J. Adv. Manuf. Technol.,DOI 10.1007/s00170-015-7019-0.
Toko Tokunaga, Danuta Szeliga, Kiyotaka Matsuura, Munekazu Ohno, Maciej Pietrzyk

4.  Grain Refinement and Ductility Improvement by Hot Extrusion Using a Heteromorphic Die with Small Holes

J. Japan Inst. Met. Mater., Vol. 79 (2015), pp. 183-190
Kaho Tomita, Toko Tokunaga, Munekazu Ohno, Kiyotaka Matsuura

5.  Relationship between Spark Plasma Sintering Temperature and Mechanical Properties of Combustion-Synthesized α- and β-SiAlON

J. Japan Inst. Met. Mater., Vol. 79 (2015), pp. 191-194
Masayuki Koshiyama, Hazuki Sako, Munekazu Ohno, Kiyotaka Matsuura

6.  Corrosion Resistance and Tensile Property of Al-Coated Mg-Li Alloy Produced by Hot Extrusion

Key Engineering Materials, Vol. 641 (2015) April, pp. 69-80.
Kaho Tomita, Kiyotaka Matsuura, Munekazu Ohno, Toko Tokunaga, Ruizhi Wu, Milin Zhang

7.  A role of interfacial energy balance in delta to gamma transformation kinetics in carbon steel with dispersed second phase particles analyzed by phase-field simulation

Computational Materials Science, vol. 106 (2015), pp. 188-192.
Daisuke Sato, Munekazu Ohno and Kiyotaka Matsuura

8. Physical and numerical modeling of backward extrusion of Mg alloy with Al coating

CIRP Annals – Manufacturing Thechnology, vol. 64 (2015), pp. 253-256.
Lukasz Madej, Toko Tokunaga, Kiyotaka Matsuura, Munekazu Ohno

9. Experimental verification of a critical condition for the formation of as-cast coarse columnar austenite grain structure in a hyperperitectic carbon steel

Metallurgical and Materials Transactions A, Vol. 46A (2015), pp. 5240-5247.
Munekazu Ohno, Masasi Maruyama, Kiyotaka Matsuura

10. Microsegregation in multicomponent alloy analyzed by quantitative phase-field model

IOP Conf. Ser: Master. Sci. Eng., 84(2015), 012075-1-8
M.Ohno, T.Takaki and Y.Shibuta

11. Microstructual features and formation processes of as-cast austenite grain structures in hypoperitectic carbon steels

ISIJ International, 55(2015) 2374-2382
M.Ohno, S.Tsuchiya and K.Matsuura

12. 結晶粒成長のフェーズフィールド・シミュレーション(特集記事)

金属, 85(2015), 929-934
大野宗一

13. Solidification in Supercomputer: from Crystal Nuclei to Dendrite Assemblages

JOM, 67(2015), 1793-1804
Y.Shibuta, M.Ohno and T.Takaki

14. A phase-field-lattice Boltzmann method for modeling motion and growth of a dendrite for binary alloy solidification in the presence of melt convection

Journal of Computational Physics, 298(2015), 29-40
R.Rojas, T.Takaki and M.Ohno

15. GPU-accelerated 3D phase-field simulations of dendrite competitive growth during directional solidification of binary alloy

IOP Conf. Ser.: Mater. Sci. Eng., 84(2015), 012063-1-7
S.Sakane, T.Takaki, M.Ohno, T.Shimokawabe and T.Aoki

16. GPU phase-field lattice Boltzmann simulations of growth and motion of a binary alloy dendrite

IOP Conf. Ser.: Mater. Sci. Eng., 84(2015), 012063-1-8
T.Takaki, R.Rojas, M.Ohno, T.Shimokawabe and T.Aoki

17. Homogeneous nucleation and microstructure evolution in million-atom molecular dynamics simulation

Scientific Reports, 5(2015), 13534
Y.Shibuta, T.Takaki and M.Ohno
 
back