学術論文:2002年

学術論文 2002年

1. Effect of Intrinsic Factors on Primary Dendrite Arm Spacing in Ni-base Binary alloys

International Journal of Cast Metals Research, Vol. 15 (2002), No. 4, pp. 367-376.
Masayuki Kudoh, Amir Abedi and Yoichi Itoh

2. Droplet Solidification of Al-Cu Eutectic alloy

International Journal of Cast Metals Research, Vol. 15 (2002), No. 4, pp. 377-381.
Yukinobu Takada, Masayuki Kudoh and Tohru Noguchi

3. Development of Freeform Fabrication Method for Ti-Al-Ni Intermetallics

Intermetallics, Vol. 10 (2002), pp. 879-885.
W. B. Cao, S. Kirihara, Y. Miyamoto, K. Matsuura and M. Kudoh

4. 反応性ラピッドプロトタイピング法による金属間化合物の3次元造形

材料, 第51巻(2002), 第9号, pp. 1051-1056.
呉長桓, 桐原聡秀, 宮本欽生, 松浦清隆, 工藤昌行

5. 3-Dimensional Freeform Fabrication of Intermetallics by reactive Rapid Prototyping

Materials, 51 (2002), No. 9, pp. 1051-1056.
Oh Jang Hwan, Soshu Kirihara, Yoshinari Miyamoto, Kiyotaka Matsuura and Masayuki Kudoh

6. Joining of NiAl to Iron-base Alloys by Reactive Casting

Metall. Mater. Trans. A, Vol. 33A (2002), No. 7, pp. 2073-2080.
Kiyotaka Matsuura, Masayuki Kudoh, Hiroshi Kinoshita and Heishichiro Takahashi

7. Process Control of Reactive Rapid Prototyping for Nickel Aluminides

Mater. Sci. Eng. A, Vol. 334 (2002), pp. 120-126.
Jang-Hwan Oh, Soshu Kirihara, Yoshinari Miyamoto, Kiyotaka Matsuura, and Masayuki Kudoh

8. Padding, Welding and Freeform Fabrication of Nickel Aluminide Intermetallic Compound by Reactive Rapid Prototyping Process

Mater. Trans. Vol. 43 (2002), No.5, pp. 1146-1152.
Kiyotaka Matsuura, Takayuki Koyanagi, Masayuki Kudoh, Jang Hwan Oh, Soshu Kirihara, and Yoshinari Miyamoto

9. Surface Modification of Titanium by a Diffusional Carbo-nitriding Method

Acta Mater., Vol. 50 (2002), No. 10, pp. 2693-2700.
Kiyotaka Matsuura and Masayuki Kudoh

10. ニオブの耐酸化被覆における化学組成と微細組織の傾斜

2001年度傾斜機能材料論文集, 未踏科学技術協会編, (2002), pp. 93-98.
小柳貴幸, 松浦清隆, 工藤昌行

11. Gradual Cahnge in Chemical Composition and Microstructure in Oxidation Resistant Coating on Niobium

Trans. Jpn. FGM, (2002), pp. 93-98.
Takayuki Koyanagi, Kiyotaka Matsuura and Masayuki Kudoh

12. 半凝固遠心鋳造法により作製したAl-Cr-Cu合金管の組織と耐摩耗性

日本金属学会誌, Vol. 66 (2002), No. 5, pp. 537-542.
大参達也,室田康宏,工藤昌行

13. 二段攪拌混合急冷法により組織制御したAl-Cr-Cu合金スラリーの遠心鋳造

日本金属学会誌, Vol. 66 (2002), No. 12, pp. 1311-1316.
大参達也,神門宏,工藤昌行
back