査読付き論文:2001年

査読付き論文 2001年

1. Carbo-Nitriding of Titanium Surface by a Diffusional Method

Proc. PRICM4, Vol. 2, Ed. by S. Hanada, Z. Zhong, S. W. Mam and R. N. Wright, Jpn. Inst. Met., (2001), pp. 2651-2654.
Kiyotaka Matsuura, Keiji Kamada, and Masayuki Kudoh

2. Fabrication of Nickel Aluminides by Reactive Centrifugal Casting Method from Liquid Aluminum and Solid Nickel

Proc. PRICM4, Vol. 2, Ed. by S. Hanada, Z. Zhong, S. W. Mam and R. N. Wright, Jpn. Inst. Met., (2001), pp. 1951-1954.
Satoru Watanabe, Yoshimi Watanabe, and Kiyotaka Matsuura

3. Feasibility of NiAl Coating on Steel by SHS Reaction between Powder and Droplets

Proc. PRICM4, Vol. 1, Ed. by S. Hanada, Z. Zhong, S. W. Mam and R. N. Wright, Jpn. Inst. Met., (2001), pp. 851-853.
Kiyotaka Matsuura, Takayuki Koyanagi, Masayuki Kudoh, Jang-Hwan Oh, Soshu Kirihara, and Yoshinari Miyamoto

4. Microstructure in NiAl/Steel Joint Produced by Reactive Casting Method

Ceramic Trans., Vol. 114 (2001), pp. 475-482.
Kiyotaka Matsuura, Masayuki Kudoh, Hiroshi Kinoshita and Heishichoro Takahashi

5. チタンの表面窒化による窒素濃度と硬度の傾斜

2000年度傾斜機能材料論文集, 未踏科学技術協会編, (2001), pp. 67-71.
松浦清隆, 鎌田啓嗣, 工藤昌行

6. Gradual Cahnge in Nitrigen Concentration and Hardness by Surface Nitriding of Titanium

Trans. Jpn. FGM, (2001), pp. 67-71.
Kiyotaka Matsuura, Keiji Kamada and Masayuki Kudoh

7. NiAlとNiのTLP接合における組成傾斜の変化

2000年度傾斜機能材料論文集, 未踏科学技術協会編, (2001), pp. 55-60.
小柳貴幸, 松浦清隆, 工藤昌行

8. Change in Composition Gradient in TLP Bonding of NiAl and Ni

Trans. Jpn. FGM, (2001), pp. 55-60.
Takayuki Koyanagi, Kiyotaka Matsuura and Masayuki Kudoh

9. 液滴/粉末間の燃焼合成反応を利用したNiAlの溶接

鋳造工学, 第73巻(2001), 第12号, pp. 852-857.
小柳貴幸, 松浦清隆, 工藤昌行, 呉 長桓, 桐原聡秀, 宮本欽生

10. Welding of NiAl by Self-Propagating High-Temperature Synthesis Reaction between Droplet and Powder

J. Jpn. Foundry Eng. Soc., 73 (2001), No. 12, pp. 852-857.
Takayuki Koyanagi, Kiyotaka Matsuura, Masayuki Kudoh, Oh Jang Hwan, Soshu Kirihara and Yoshinari Miyamoto

11. New Concept: Cybermaterials

Functionally Graded Materials in The 21st Century, Kluwer Academic Publishers, Ed. K. Ichikawa, (2001), pp. 12-17.
Yoshinari Miyamoto, Jong-Hwan Oh, Soshu Kirihara and Kiyotaka Matsuura

12. Joining between NiAl and Heat Resistant Alloys by Reactive Casting

Adv. Eng. Mater., Vol. 3 (2001), No. 5, pp. 311-314.
Kiyotaka Matsuura and Masayuki Kudoh

13. Evaluation of Three-Dimensional Orientation of Al3Ti Platelet in Al-based Functionally Graded Materials Fabricated by a Centrifugal 

Acta Mater., Vol. 49 (2001), No. 5, pp. 775-783.
Yoshimi Watanabe, Hiroyuki Eryuu and Kiyotaka Matsuura

14. Development of Freeform Fabrication of Intermetallic Compounds

Scripta Mater., Vol. 44 (2001), No. 3, pp. 539-544.
Kiyotaka Matsuura, Masayuki Kudoh, Jang-Hwan Oh, Soshu Kirihara and Yoshinari Miyamoto

15. Reactive Casting of B2-ordered Ni-Al-Co Ternary Intermetallic Alloys

Mater. Trans. Vol. 42 (2001), No. 2, pp. 263-268.
Kiyotaka Matsuura, Tahir Irfan Khan, Tatsuya Ohmi and Masayuki Kudoh

16. Precision Casting of Ni-Al Alloy and Simultaneous Joining to Dissimilar Metals by Modified Centrifugal Combustion Synthesis

Mater. Trans. Vol. 42 (2001), No. 2, pp. 298-302.
Tatsuya Ohmi, Kazuhiko Kirihara and Masayuki Kudoh

17. Ni-Al系金属間化合物のテルミット型燃焼合成における反応生成物の溶融挙動

日本金属学会誌, Vol. 65 (2001), No. 3, pp. 167-170.
大参達也,矢野間潤持,工藤昌行

18. テルミット型燃焼合成法を利用したNi-Al系金属間化合物の遠心鋳造

日本金属学会誌, Vol. 65 (2001), No. 5, pp. 458-463.
大参達也,室田康宏,桐原和彦, 工藤昌行

19. 遠心燃焼合成法により作製したNiAl鋳造材中の気孔欠陥

日本金属学会誌, Vol. 65 (2001), No. 8, pp. 701-706.
大参達也,室田康宏,工藤昌行

20. Al-Cr系複合鋳込み遠心鋳造材のレーザ表面改質処理

日本金属学会誌, Vol. 65 (2001), No. 11, pp. 1038-1044.
大参達也,高橋和久,工藤昌行
back